Brand: KORAKOH

Product Code: FOOT PVC-9000B

Height: 150 mm

Brand: 3M

Product Code: RESP-3M-6057

Type: Inorganic vapors and acid gases, Organic Vapors bp>65 degrees°C

Net Weight: 0.206 kg / pc

Brand: 3M

Product Code: RESP-3M-6054

Type: K1 Ammonia

Net Weight: 0.255 kg / pc

Brand: 3M

Product Code: RESP-3M-6051

Type: A1 Organic Vapor

Net Weight: 0.181 kg / pc

Brand: 3M

Product Code: RESP-3M-5N11

Color: White

Net Weight: 0.005 kg / pc

• Knee-length Raincoat.
• Made of 0.30 mm PVC on polyester broadloom fabric and brite safe yellow colour for excellent visibility.
• Non-detachable drawstring hood which can fit over safety cap.
• 2 front waist pockets convenient for put somethings. 
• Non-conductive, non-corrosive, and rustproof Snap-on Buttons.
• Front zipper and extra flap for extra waterproofing & protection.
• Ventilation cape enhance Air Circulation and more comfortable.

• SNR: 23dB.
• Comply with EN 352-2:2002.

• Noise reduction rating (NRR) 30 dB (two-hand insertion) and 25 dB (one-hand insertion) CSA Class AL.
• Meet ANSI S3.19 : 1974
• Malaysia's DOSH Approvals No: JKKP/2021/12-01/05/00074/0002

• Malaysia DOSH Approval: JKKP/2021/12-01/06/00031/0005
• Meet Malaysia SIRIM requirement (MS 2323:2010)
• NIOSH N95 & GB2626 KN95 approved respirator
• 3M Proprietary Advanced Electret Media help make breathing easier
• Adjustable Noseclip that helps provide a custom fit and secure seal
• Vertical flat-fold design offers convenient storage, portability and dispensing.
• Soft inner layer, soft against face
• Welded, Knitted Headbands for added comfort
• Compatible with a variety of protective eyewear and hearing protection.

• With Diaphragm Check Valve to reduce wastage of chemicals solution and save chemicals cost.
• Maximum 20 Bar working pressure of Diaphragm Check Valve.
• Asymmetric Double Cap is short, compact desi gn and made from hard-wearing plastic POM.
• Slimmer than other comparable double flat fan nozzles.
• Separates slides for each nozzle allows individual exchange of each nozzle tip, easy to clean.
• Nozzles are placed in a 10 degree / 50 degree Orientation, this combination of spray patterns has been successfully proven by the TurboDrop HiSpeed nozzles.
• Good drift control an excellent coverage of vertical and angular targets.
• Optimum pressure: 2-4 bar
• Application speeds from 6 - 15 km/h or more.
• Fits on all nozzle holders with standard bayonet system.

• Space-saving compact design
• Economical model for every users
• Versatile

• Aerial application - for detection of swath width and to evaluate the effects of prop wash, wing tips vortices and nozzle placement or distribution. Attach the cards onto a horizontal support slightly above the ground or plant canopy.
• Orchard sprayers - for evaluation of spray distribution and penetration throughout the tree. Staple the cards to leaves in upper, centre and lower parts of the tree.
• Field sprayers - for evaluation of spray distribution and droplet density along the boom. Staple long collectors (26mm x 500mm) to a board and place it across a section of the boom swath.
• Backpack/Hand-held sprayers - for evaluation of spray distribution and droplet density. Place collectors across a single run width. Spray cards can be evaluated by visual estimate or by counting the droplets under a pocket lens.

• Meets BS EN 149:2001 +A1:2009 FFP2 NR D Standard
• Malaysia DOSH Approval: JKKP No.: RP 07/20
• Advanced Electrostatic Media - with highly charged microfibers to enhance the capture of airborne particles while allowing you to breathe easier
• Flat-folded easy to store when not in use
• Embossed top panel helps reduce fogging of eyewear
• Sculpted nose panel conforms well to nose and eye contours and helps provide a good field of vision. The curved, low profile design also improves compatibility with eyewear
• Ingenious 3-panel design fits a wide range of face shapes and sizes and accommodates facial movements
• The large soft nose foam material and smooth inner cover web help to create a comfortable environment for the face even for work in hot humid environments
• Headband material (Thermoplastic Elastomer) which helps even out strap pressure

• The thin foam coating provides exceptional comfort, breathability, strong grip in dry, slightly wet, or oily environment
• Fine gauge knit nylon liner provides Exceptional flexibility as well as padded protection
• Unique nitrile formula offers high resistance to abrasion and scratch
• Machine washable
• Elastic knit wrist cuff is easy to pull on and off quickly and keeps out debris
• Ergonomic design, Shape memory, Chemicals and Oil resistance
• EN388:2016 3122A for great resistance to abrasion with limited tear, puncture resistance & TDM cut test.

• D.O.S.H Approval No.: JKKP DR 60/99 
• Conforms to Standard: EN149, AS/NZS 1716 
• Color: White 
• Respirator Style: Flat Fold 
• Nose Foam 

• Ideal used for guiding and transferring liquids (Agrochemicals , Paints, Lubrication oil, Petrol, Diesel, Cooking oil & etc) or powder into a small opening or small containers
• Can be use with filter (MH/35B) to remove fine particles from a liquids.
• With hanging hole design, convenient hang it on the wall or other places
• Lightweight, < 40g
• They are extremely versatile, suitable for Agrochemicals industries, Laboratories, Multiple Kitchen, Gasoline industries, Automotive industries & etc.

• 3M™ Pressure Diffusion Technology allows temples to naturally adjust to individual head sizes reducing the need to stock multiple frame sizes at work sites
• Padded temple touch points and soft nose pads provide added comfort for long term wear
• Secure, snug fit helps keep eyewear in place without slippage even when the person is in motion
• Polycarbonate lenses absorb 99.9% UVA and UVB down to 280 nm and meet the requirements of CSA Z94.3 and ANSI Z87.1-2015
• Anti Fog & Anti Scratch lens coating
• Weighing less than 1 ounce

• 3M™ Pressure Diffusion Technology allows temples to naturally adjust to individual head sizes reducing the need to stock multiple frame sizes at work sites
• Padded temple touch points and soft nose pads provide added comfort for long term wear
• Secure, snug fit helps keep eyewear in place without slippage even when the person is in motion
• Polycarbonate lenses absorb 99.9% UVA and UVB down to 280 nm and meet the requirements of CSA Z94.3 and ANSI Z87.1-2015
• Anti Fog & Anti Scratch lens coating
• Weighing less than 1 ounce

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• With bend head
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Ideal use to reach target effectively 
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Fiber material

• Ideal use to reach target effectively 
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Fiber material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

• Suitable for Indoor & Outdoor Plants
• Smooth Surface
• Chemical Resistant
• Green Color
• Made of Polyolefin Resin-Coated Steel
• Made in Indonesia
• 11 length available

1 OUTER LAYER: Polygene + 18% Spandex

• Ideal use to reach target effectively  
• To keep the distance of nozzle away from sprayer
• To avoid contamination
• Brass material

• Developed by Hyosung.
• Come with special fiber blocks ultraviolet rays (UV cut ability).
• Offers high absorbency, wind resistance and quick-drying feature.
• Soft Banding - Seamless soft banding construction minimizes chafing with skin and prevents from easily slipping.
• Comfortable Fit From Seamless Construction - Made with special method, its entire lining is seamless, offering very comfortable fit.
• One size fits all - The elasticity of its material provides comfort for wearer and looks fit.
• Three Dimensional Pattern - The three dimensional pattern gives a fashionable feel, differentiating from other cheap wristlets.
• Two color available: Black & Grey

• The bayonet system can help prevent unintentional disengagement of the spray nozzle.
• Easy cleaning, disassembling, and assembling.
• Made from hard-wearing Polyacetal (POM), with high wear and shock resistance.

• ½” hinged Clamp type nozzle holder with 3/8” BSP Threaded Cap.
• Can use up to maximum pressure 20 Bar.
• No extra O-Ring and Washer required to fix Nozzle together and without any leakage problems.
• Easy cleaning, disassembling, and assembling.
• Made from hard-wearing Polyacetal (POM), with high wear and shock resistance.

• This W Spiral Hole Digger with hole / head diameter 75 mm
• Ideal for poles and piles hole digging, tree poles support , fertilization and tree planting
• It can dig a hole with diameter 75 mm and depth about 150 mm in one operation and 600 mm depth by repeating several times
• Carbon steel S45C equivalent is used for spiral blades and vertical cutting blades, and heat treatment quenching (increases strength and wear resistance) and tempering (increases elasticity)
• The "Pressing Plate" presses the soil tightly and hold firmly
• Two (double) spiral blades can dig into the soil and work more efficiency
• Two vertical cutting blades to scrape the wall surface of hole, making it easy to pull up, especially for clay soil

• This W Spiral Hole Digger with hole / head diameter 60 mm
• Ideal for poles and piles hole digging, tree poles support , fertilization and tree planting
• It can dig a hole with diameter 60 mm and depth about 150 mm in one operation and 600 mm depth by repeating several times
• Carbon steel S45C equivalent is used for spiral blades and vertical cutting blades, and heat treatment quenching (increases strength and wear resistance) and tempering (increases elasticity)
• The "Pressing Plate" presses the soil tightly and hold firmly
• Two (double) spiral blades can dig into the soil and work more efficiency
• Two vertical cutting blades to scrape the wall surface of hole, making it easy to pull up, especially for clay soil

• Made up of plastic so it will not rust
• Waterproof
• Lightweight and portable
• Can write on the front and back using permanent marker
• Easily hang on the flower and plant branch

• Both Rotation blades and fixed blade have through the heat treatment, with excellent abrasion resistance, and the sharpness could be sustained due to the hardening reached the core of steel.
• The secret of the sharpness is due to the hardness of blade
• Six rotation blades and one fixed blade have hardened. Both blades maintained balance of frictional wear.
• Due to the friction of rotation blades and fixed blade, the cutting section of grass is neat
• The stability of lawn cutting is because of the no shaking structure of the mover
• The mover is compact and easy to operate and moving.
• Less consume parts than electronic and motorist trouble, only the maintenance of blades. Power supply, extension code and so on are not required, immediately could start the lawn cutting, area with tree easily turning and using.
• Different from battery, during the operation without noise, could work in quiet
• It has a box-shaped structure that does not deform.

• Ideal for Pruning & Trimming of branches, leaves and hedges
• The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well on the hand, adopted tie up handle, overall slim and smart finish
• Blade is using Yasuki Steel and through heat treatment, so it has excellent abrasion resistance, and the core of steel has firmly hardened, provided sharp and long-lasting cutting
• The back has a finish for removing resin and dirt
• Cutting ability up to 12 mm

• Ideal for Pruning & Trimming of thick branches, and Cutting off cut branches
• The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, durable and fits well on the hand
• The blade edge use as S45C treated with heat to provide excellent wear resistance and long-lasting cutting
• The cutting blade and receiving blade, don't let the branch slip away
• Cutting ability up to 15 mm

• Is a Ratchet function pruning shears can cut in about 1/3 of the normal pruning shears force
• At-thick branches several times, thin branches cut with sputtering and once it 
• Lightly durable Nylon, Fiberglass Handle 
• With TPR (rubber) grip to prevent slipping and easily fit in the hand
• Cutting ability up to 18 mm
• SK-5 (Fluorine Coating) blade

• Ideal for harvesting, flower thinning, and bud cutting works
• Stainless Steel blade is heat treated, has excellent wear resistance and sharpness
• Considered for small hand women, round grip to prevent the finger slip away when the blade open
• Both handles are integrally molded with a resin + rubber with non slip function
• Cutting ability up to 8 mm
• With a strap that is convenient for carrying and storing 
• Received Good Design Award

• Ideal for Pruning and Harvesting works of pumpkin, bitter gourd & other with thick vines plant
• Stainless Steel blade is heat treated, has excellent wear resistance and sharpness
• Considered for small hand women, round grip to prevent the finger slip away when the blade open
• Both handles are integrally molded with a resin + rubber with non slip function
• Cutting ability up to 12 mm
• With a strap that is convenient for carrying and storing 
• Received Good Design Award

• Ideal used in fresh flower and flower arrangement
• Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
• The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
• Caulking method for body joint
• Cutting ability up to 8 mm

• Long blade edge 70 mm
• Widely used for pruning, bonsai care, harvesting and from gardening work to agricultural work
• Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
• The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
• Finish back cutter gap removes resin and dirt
• Caulking method for body joint
• Cutting ability up to 8 mm

• Widely used for pruning, bonsai care, harvesting and from gardening work to agricultural work
• Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
• The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
• Finish back cutter gap removes resin and dirt
• Caulking method for body joint
• Cutting ability up to 8 mm

• Fine cutting edge suitable for fruit thinning and harvesting
• Cutting ability up to 5 mm
• Steel Blade
• Hard chrome plating strong resists rust
• With a hollow that resin does not adhere easily
• Vinyl coated grip help fits comfortably and reduce fatigue in the hand

• Ideal for harvesting fruits & vegetables, bud trimming of flower & fruit trees
• Cutting ability up to 6 mm
• SK-5 Blade (Hard chrome plating)
• Lightweight Aluminum + TPR Handle
• New design (Higher fit & less cutting power loss) for realizing light cutting force
• UD (Universal Design) that can be used by men & women
• With Wire cut
• Convenient hand-lock type
• Smooth insect spring type

• Ideal for Pruning of flowers and twigs, bunch cutting of cut flowers, harvesting of fruit trees and vegetables, trim flowers bud and fruit trees bud
• Cutting ability up to 9 mm
• SK-5 Blade (Hard chrome plating)
• Lightweight Aluminum + TPR Handle
• New design (Higher fit & less cutting power loss) for realizing light cutting force
• UD (Universal Design) that can be used by men & women
• With Wire cut
• Convenient hand-lock type
• Smooth insect spring type

• Scissors for bud cutting, twig cutting, thin branches pruning, and others works
• Blade is heat treated, it has excellent wear resistance and sharpness
• With resin grip and thermoplastic rubber (TPR) to prevent slipping and easily fit in the hand
• With a Strap that is convenient for carrying and storing
• Cutting Ability up to 8 mm

• Ideal for Harvesting Fruits, Vegetables, and Bud trimming of flower & fruit trees. 
• Blade is heat treated, it has excellent wear resistance and sharpness
• With resin grip and thermoplastic rubber (TPR) to prevent slipping and easily fit in the hand
• With a Strap that is convenient for carrying and storing
• Cutting Ability up to 6 mm

• Ideal for Pruning and Trimming of garden trees and fruit trees
• Cutting ability up to 15 mm
• SK-5 Blade (Hard chrome plating)
• Lightweight Aluminum + TPR Handle
• New design (Higher fit & less cutting power loss) for realizing light cutting force
• UD (Universal Design) that can be used by men & women
• With Wire cut
• Convenient hand-lock type
• Smooth insect spring type

• Scissors for pruning work on raw trees and fruit trees
• Ideal for Bonsai, Gardening and Fresh Flowers
• Blade is heat treated, it has excellent wear resistance and sharpness
• The blade has a good bite and the cut objects do not easily escape
• With resin grip and thermoplastic rubber (TPR) to prevent slipping and easily fit in the hand
• With a Strap that is convenient for carrying and storing
• Cutting Ability up to 12 mm

• Scissors for pruning raw wood and fruit trees
• Cutting Ability up to 15 mm
• Steel Blade edge (Yasuki Steel + Mild steel)
• The blade can be sharpened 
• Body joint screw fixing type
• Handle with safety lock

• Spare saw blade for Gold Zojirushi High-branch Saw 1 m
• Ideal for pruning and trimming branches of raw trees
• Versatile blade can be pruned smoothly
• Ultra-lightweight (only 21 g) and easy to use
• Saw blade is made from SK-5 steel 

• Ideal for high branch pruning and cutting
• Versatile blade can be pruned smoothly
• Tip of the blade is key-shaped and the saw blade does not come off easily
• Ultra-lightweight (only 150 g) and easy to use
• Aluminum handle lance
• Saw blade is made from SK-5 steel 

• Very Light (only 890 g) and Comfortable to use
• Ideal for high trees / places pruning and collecting fruits
• 60 mm blade edge
• Included Saw for thick branches cutting 
• The saw easily can be installed and removed with the wing nut 
• Telescopic Lance with 5 step extension function (1.8 m - 3.0 m) 
• Resin Grip make it comfort, easy to hold and does not get tired 
• Spring type wing blade and strong pruning (allowable cutting diameter 12 mm of raw wood) 

• Used for grass cutting work
• The blade is made of a composite material of Steel (SK 5 & SS400) and treated by heat to provide excellent wear resistance, sharpness, and blade can be sharpened
• Peaking processing strengthen against bending
• Lightweight (only 100 g)

• Ideal for raw tree pruning, crafts and forest work
• The blade has been fully hardened and impact hardened to improve hardness, sharpness and durability
• The handle and sheath are made of beech wood and have a varnish
• The sharpening is ordinary tooth of Edo tooth

• This pruning saw with 2 sections of tooth structure
• Ideal for fruit tree pruning, logs pruning and forest work
• The blade has been fully hardened and impact hardened to improve hardness, sharpness and durability
• The handle and sheath are made of beech wood and have a varnish
• The sharpen of 2 type (Fine & Coarse) tooth of Edo tooth
• Use fine tooth at starting and final of sawing, the sawing of surface can smoothly cut

• Folding Hacksaw for sawing logs
• The sharpen with fine tooth
• Ideal for trimming and processing logs
• Suitable for bamboo pulling and plywood cutting
• The saw blade uses a hardened steel strip, and impact hardening is applied to the cutting edge to improve hardness, sharpness and durability
• The grip part is made of cherry wood and with varnish coating
• Lightweight (only 120 g)

• Folding Hacksaw for sawing logs
• Regular Tooth
• Ideal for trimming and raw tree pruning work
• The saw blade uses a hardened steel strip, and impact hardening is applied to the cutting edge to improve hardness, sharpness and durability
• The grip part is made of cherry wood and with varnish coating
• Lightweight (only 120 g)

• Ideal for grass shaving work, digging, planting bulbs and seedlings.
• Stainless Steel blade is heat treated, it has excellent abrasion resistance and sharpness, hard to rust and easy to maintain
• Both sides with blade make it easy to use and convenient for slopes shaving works

• Ideal for grass shaving work
• Steel cutting edge is made of a composite material and has excellent abrasion resistance and sharpness due to heat treatment, enabling sharpening of the blade
• The handle adopts design that fits in your hand

• Putting soil in and out from flower beds, planters and for fertilizing
• Stainless Steel Head hard to rust
• With a scale (Up to 10 cm) that can measure the planting depth of the bulb

• Tank Capacity 1000 ml
• Tank material : Polyethylene
• Trigger Pump
• Working Pressure: 150 psi
• Color: White
• Made by Syarikat Jun Chong Sdn Bhd

Here are some features of this mini fertilizer:

• Measuring capacity: 50 ml to 550 ml
• It is made up of plastic so it is very lightweight, easy to carry and durable.
• The design is very handy and portable.
• It comes with calibrating guide to measure the capacity of fertilizer.
• It is recommended to be used with carrying bucket.
• Two (2) colors available: Green & Red

• Storage capacity: 12.7 litres & 19 Litres.

• It is made up of plastic so it is very lightweight and easy to carry.

• The design is compact, portable and stackable.

• Ergonomic design make it much more comfortable for user to put on left or right side.

• It equipped with adjustable, solid carrying strap.

• Three (3) colors available: Black, Green and Red.

• Quickly find worn spray nozzles tips. Just attach the specially engineered adapter cup over a spray tip.
• Accurately measure true tip flow rate.
• Enable displays in GPM (Gallon per minute) & LPM (Liter per minute).
• The back cover can be easily opened using a coin for containing replacement nozzles and a small brush for cleaning

• Offers good comfort, dexterity & performance
• Cotton knitted gloves are suitable for a wide range of applications
• Ideal for heavy duty tasks which involve a lot of abrasion
• Type A106 - 600g Cotton Knitted Gloves

• NIOSH approved R95 rating
• Malaysia DOSH Approval: JKKP/2021/1201/06/00033/0003
• Malaysia SIRIM: MS 2323 : 2010
• Advanced Electrostatic Media - with highly charged microfibers to enhance the capture of airborne particles while allowing you to breathe easier
• Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable
• Braided headbands and an adjustable M noseclip helps provide a custom and secure seal
• Compatible with a variety of protective eyewear and hearing protection
• Fitted with a 3M™ Cool Flow™ Exhalation Valve designed to release your hot, humid exhaled breath quickly, helping to reduce heat buildup.
• Collapse resistant shell 

• NIOSH approved R95 rating
• Malaysia DOSH Approval: JKKP/2021/12-01/06/00030/0002
• Malaysia SIRIM: MS 2323 : 2010
• Advanced Electrostatic Media - with highly charged microfibers to enhance the capture of airborne particles while allowing you to breathe easier
• Adjustable nose clip
• Braided headbands
• Collapse resistant shell
• Carbon layer for relief against nuisance levels of organic vapors

• Two customised Asian size face pieces [3200 (M/L) & 3100 (S/M)] for more secure fit and seal.
• Textured face piece to prevent slipping and maintain consistent seal at all times.
• Compact design increase vision and safety.
• Lightweight body and cradle head harness increase comfort
• Minimal replaceable parts to save space, time and money.
• Snap fit cartridges for easy assembly.
• Drop-down strap for wearer convenience and acceptance.

• Shell is made of tough Acrylonitrile Butadiene Styrene (ABS) material
• Comfortable and 6-point suspension with height adjustment
• Easier Push-Lock Ratchet Suspension
• Embedded with adjustable ventilation valves
• Short brim for better visibility
• Sweatband can be remove for cleaning
• Meets SIRIM (MS 183:2001) & DOSH Approved (JKKP No.: SH/09/18)
• Adjustable Chin Strap included

• Material rubber, tear resistance, wear resistance. Suitable for long-term wear.
• Lightweight, balanced design, improved product comfort and durability.
• Four-point fixed design, stable and stable.
• Fine cutting, easy installation.

The 3M Dust Filter 2135 P3 is a dust filter that protects against solid and liquid particles. It can be applied directly to the 3M masks of the 6000- and 7500 series.

The filters and mask must be ordered separately.

• Bayonet connector for quick and secure locking
• Lightweight
• Low breathing resistance through double filter
• Suitable for 3M masks of the 6000 and 7500 series
• Protection level: P2
• Supplied in 2 pieces per package

Do Not Use For:

Gases and vapors, including those present in paint spray operations, unless combined with approved chemical cartridges.

• Sandblasting.
• Oxygen deficient atmospheres.
• Aerosol concentrations that exceed:
  • 10 times the permissible exposure limit (PEL) with half facepiece, or
  • 10 times the PEL with full facepiece qualitatively fit tested, or
  • 50 times the PEL with full facepiece quantitatively fit tested, or
  • applicable government regulations, whichever is lower.

Tips for users:

• Classification protection level dust filters:
• P1: Inert dust, smoke and mist that do not change the structure of the respiratory system. Limit value: up to 4 x MAC ? 10 mg/m³
• P2: Harmful substance, smoke and mist that can damage the respiratory system. Limit value: up to 10 x MAC between 10 mg/m³ and 0.1 mg/m³
• P3: Higher concentration of harmful substances, smoke and mist that can damage the respiratory system. Plus: against ceramic fibres, chromates, bacteria, viruses, micro-organisms, radioactive or biochemical substances Limit: up to 50 x MAC between 10 mg/m³ and 0.1 mg/m³
• P3 + full face mask: high toxic substance, smoke and mist that can be absorbed in the blood: particles of carcinogens, particles of radioactive substances, bacteria, viruses, enzymes and spores. Limit value: ? 0.1 mg/m³

• Malaysia's DOSH Approval – JKKP No. EW 153/04
• Meet Requirements of EN 166:2001, EN 170:2002 & EN 172:1994
• Optical Class 1 for high optical clarity to allow prolonged, comfortable wear.
• Stylish, Modern & Sporty Wraparound Design
• Smoke lens provides anti-fog, anti-scratch resistance
• Polycarbonate lens absorbs 99.9% UV radiation & protect from Sun Glare
• Temple pivots enable the user to adjust the lens angle providing optimal fit & comfort
• 4 positions temples lengths adjustable
• Soft temple tips reduce pressure around ears

• Malaysia's DOSH Approval – JKKP No. EW 152/04

• Meet Requirements of EN 166:2001 & EN 170:2002

• Optical Class 1 for high optical clarity to allow prolonged, comfortable wear.

• Stylish, Modern & Sporty Wraparound Design

• Smoke lens provides anti-fog, anti-scratch resistance

• Polycarbonate lens absorbs 99.9% UV radiation

• Temple pivots enable the user to adjust the lens angle providing optimal fit & comfort

• 4 positions temples lengths adjustable

• Soft temple tips reduce pressure around ears

• Quickly find worn spray nozzles tips
• Accurately measure true tip flow rate
• Fast and simple operation - Readings in 10 seconds or less per tip
• Enable displays in GPM (Gallon per minute), LPM (Liter per minute) & OPM (Ounce per minute)
• JKI - Julius Kuhn Institute Certified G 2050

• Can be used for plant visitors.
• Wraparound coverage with side shields.
• Lightweight for comfort.
• Nice visibility as the lens is crystal clear.
• Can protect eyes while drilling, cooking and driving motorcycle. Let’s give it a try.

• Gender : Unisex
• Colour : Navy / Khaki
• Top type : Flat
• Material : Polyester
• Head width : 19cm
• Hat depth : 10cm
• Brim width : 7 cm
• Adjustable Chin Strap
• Comfortable, lightweight, simple & fashionable
• Protect you from sunshine

• At least 95% filtration efficiency against certain non-oil based partcles.
• Activated Carbon Layer to help remove Organic Vapour odour.
• With advanced electrostatically charged miscrofiber filter media.

• Quickly snap fit for easy assembly onto the 3M 50 series half piece repiratory.
• Ventilation grooves to make breathing easier and cooler.
• Grooves to hold 3M 1744C filter in position.

• Made from soft, resilient silicone and heat-resistant plastics.
• Cool, dry comfort with the 3M cool flow valve and valve cover design to direct exhaled breath downward.
• Softer feel on the face provided by a soft seal design and advanced silicone material.
• Slim, flexbile head hardness.
• Enhanced compatibility and comfort with light and compact design.
• Reduced tension and pressure points on the face with unique face seal design.
• Compatible with 3M snap-fit style cartridge and filters.

- To be used inside the tank to tighten the pump cylinder attached to the knapsack sprayer tank.

• Convex degree
• High acid liquid
• Convenience with hanger
• Transparency
• Indissolubility
• Made of Polypropylene

• Solid Cone
• Adjustable
• POM material on nozzle cap
• High chemical stability
• 2 size available
• Manufactured by Syarikat Jun Chong Sdn Bhd

Marking : Logo Double Locking Security Seals

Serial No. : 8 digit (Pre-Arranged)

Seal Colour : Orange, Red, Yellow, Black & White

Printing : UV Laser Print

• Palm oil fertilizer spreader
• Clear calibration guide
• 3 sizes available
• Use fertilizer efficiency
• Less wasting fertilizer
• Easy to clean

• On/off switch
• Three types available
• Long durablility
• Easy to fix
• Good quality

• Three types available
• Long durablility
• Easy to fix
• Good quality
• Brass cleaning chamber

• Three types available
• Long durablility
• Easy to fix
• Good quality

• Cleaning chamber for automatic release
• Fix to automatic release
• Made of plastic 

• Automatic release for sprayer
• Durable
• Easy to use
• Made of plastic

• Brass twin elbow lance
• 2 different sizes
• Double bends provide wider range
• Made by Syarikat Jun Chong Sdn Bhd

• Plastic twin elbow lance
• 2 different types of material
• Twin angles provide wider range
• Made by Syarikat Jun Chong Sdn Bhd

• Brass elbow lance
• 3 types with difference angle
• The lance angle more easily to reach target
• Made by Syarikat Jun Chong Sdn Bhd

• Adaptor for nozzle or accessories
• Can fit in various threads
• To convert thread in order to fit nozzle or accessories
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Adaptor for nozzle tips
• Can fit hollow cone ceramic of nozzle tips
• To convert thread in order to fit nozzle tips
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Adaptor for nozzle tips
• Can fit various types of nozzle tips
• To convert thread in order to fit nozzle tips
• Plastic material
• Made by Syarikat Jun Chong Sdn Bhd

• Convex degree
• High acid liquid
• Convenience with hanger
• Transparency
• Indissolubility
• 2000ml / 1000ml / 500ml / 250ml
• Made of Polypropylene

• Ideal for car washing
• Made of brass
• Heavy duty use
• High pressure 
• Adjustable
• Made from Syarikat Jun Chong Sdn Bhd

• Ideal for spraying pathway 
• Made of brass material 
• Usually used at 1 bar
• Adjustable
• Thread 22G
• Made from Syarikat Jun Chong Sdn Bhd

• Made of POM
• Flat Fan Nozzle Tip
• 3 Sizes Available
• 140 degree
• Made from Italy
• Used for Herbicide Spraying
• Suitable for Knapsack Sprayer

• Fan spray pattern
• Suitable for Straight & Circle Spraying 
• Made of brass material 
• Can be adjusted
• Used for applying pesticides
• Thread 22G
• Made from Syarikat Jun Chong Sdn Bhd

• Suitable use for Herbicides Spraying
• Made of POM
• Fan Nozzle
• 6 sizes Available
• Suitable for Knapsack Sprayer
• Made in Italy

• Fan spray pattern
• 6 sizes available
• Used for applying pesticides
• Made of brass material 
• Non-adjustable
• Thread 18G & 22G
• Made from Syarikat Jun Chong Sdn Bhd

• Hollow Cone spray pattern
• Herbicides & Pesticides spraying 
• Use for tall tree or long distance spraying
• Made of brass material 
• Spray up to 9.5m 
• Nozzle thread 22G
• Spray angle can be adjust up to 80º

• Hollow cone spray pattern
• Herbicides, Insecticides and Fungicides spraying 
• Use for tall tree or long distance spraying
• Made of material POM 
• High chemical stability
• Long distance spray up to 9.5m 
• Light weight 12g only
• Nozzle cap can be easily removed for cleaning operations 
• Nozzle thread 22G
• Spray angle can be adjust up to 85º

• Most suitable for Herbicides application 
• Made of material POM
• Two-piece design, no tools required for opening 
• Air cleaning system, no blockage of air entrance 
• High drift reduction 
• Wide application range 
• Uniform droplet spectra 
• Made from Germany

• Hollow cone
• Herbicides, Insecticides and Fungicides spraying 
• Use for Selective Spraying & Circle Spraying
• Made of brass 
• Producing fine droplets size 
• Thread 18G & 22G
• spray angle can be adjust up to 90°
• Made from Syarikat Jun Chong Sdn Bhd

• Hollow Cone
• Suitable for Herbicides, Insecticides and Fungicides spraying. 
• Use for Selective Spraying & Circle Spraying
• Made of durable brass 
• Producing fine droplets size 
• Thread 22G
• With 10 Vortex bodies for more efficient spray
• Made from Syarikat Jun Chong Sdn Bhd

• Light in weight
• Durability 
• With zip lock system
• Made of polystyrene material
• Orange color
• 22cm length
• Made in Malaysia

• Lightweight and durability 
• With Zip Lock system
• Made of Oriented Polystyrene material
• Orange color
• Length 24cm
• Made in Malaysia

• Lightweight and durability 
• Made of polypropylene material
• With a tie to enhance the chisel firmly
• Yellow color
• Made in Malaysia

• Lightweight and durability 
• Designed for variety sickle 
• With Zip Lock system
• Made of Oriented Polystyrene material
• Orange color
• Length 60cm

• Lightweight and durability 
• Designed for variety sickle 
• Made of polypropylene material
• Yellow color
• Length 60cm
• Made in Malaysia

• Excellent heat, spark & harmful welding rays protection 
• Made of quality split leather 
• With leather straps and buckles
• Free size

• Soft Urethane PVC Safety Boot
• Soft and synthetic inner lining
• Anti-slip sole and anti-static properties 
• Oil resistance sole and waterproof 
• Chemical resistant sole 
• Manufactured under stringent quality control 
• Steel Toe Cap & Steel Mid Sole
• Yellow color

• Soft Urethane PVC Safety Boot
• Soft and synthetic inner lining
• Anti-slip sole and anti-static properties 
• Oil resistance sole and waterproof 
• Chemical resistant sole 
• Manufactured under stringent quality control 
• Steel Toe Cap & Steel Mid Sole
• Black color

• Soft Urethane PVC Safety Boot
• Soft and synthetic inner lining
• Anti-slip sole and anti-static properties 
• Oil resistance sole and waterproof 
• Chemical resistant sole 
• Manufactured under stringent quality control 

• Soft Urethane PVC Safety Boot
• Soft and synthetic inner lining
• Anti-slip sole and anti-static properties 
• Oil resistance sole and waterproof 
• Chemical resistant sole 
• Manufactured under stringent quality control 
• Black color

• Excellent in heat, spark & abrasion protection 
• Made of top 5 grade split leather 
• Full cotton lined
• Come with a high gauntlet cuff 
• Superior rigger chrome leather gloves
• Free size

• Flocklined Latex Neoprene Glove 
• Thicker gauge for superior protection against abrasion 
• Increased resistance against tear and puncture 
• Excellent dexterity for a heavy duty glove 
• Food Safe
• Chemical resistant
• Black color

• Soft and sensitive with unique rubber coating at palm
• Excellent flexibility, dexterity and ventilation 
• Seamless knitted polycotton liner
• Increases user comfort and absorbs perspiration 
• Rubber coating is designed with crinkle finish

• Disposable polyethylene gloves 
• Ambidextrous glove 
• FoodMates® comply with FDA food handling requirements (21 CFR 177.2600) 
• Straight cuff
• Bakeries, delicatessens and high volume canteens
• Food handling
• Catering and food service
• Acidic, aqueous and alcoholic food contact
• 100 pcs / pack

• Super sensitive
• Comfortable nitrile gloves 
• Oil resistant: specially designed for handling food and animal fats 
• Excellent grip 
• Ideal glove for people who have sensitive skin or allergic to natural rubber protein
• Green color

• Extended Length
• Electro Static Lining Technology 
• Soft silky cotton lining 
• Flock lined interior for comfort 
• Resistance to Solvents, Oils & Fats and certain acids & alkalis 
• Premium grade Acrylonitrile Butadiene rubber 
• Specially formulated for improved dexterity 
• Minimal finger fatigue
• Green color

• Extended Length
• Electro Static Lining Technology
• Soft silky cotton lining 
• Flock lined interior for comfort 
• Thicker gauge
• Resistance to solvents, oils & fats and certain acids & alkalis 
• Premium grade Acrylonitrile Butadiene rubber 
• Specially formulated for improved dexterity 
• Minimal finger fatigue

• Cowhide split leather 
• Sew on adjustable neck loop & waist ties 
• Superior protection 
• Heavy duty stitching 
• Reinforced snaps
• Yellow & white color

• 100% Polyester fabric and bias trim 
• Hook and loop front closure and V-neck design 
• Lightweight, breathable mesh 
• Provides 3600 degree reflective material 
• Meets ANSI/ISEA 107-2010 Class 2
• Washable and greater user comfort
• Size L

• Made of PVC (Vinyl) 
• Liner Colour: Blue 
• Thickness: 6 mil
• Sealed grommets
• Chemical resistant
• Protection from acid

• Lightweight
• Innovative design features
• Ergonomics offer excellent fitting and protection 
• 3 – layered SPP (Spun bounded Polypropylene) laminated 
• Disposable apron
• Yellow color

• Comfortable & lightweight 
• Protection against biohazards and inorganic chemicals 
• Partial body chemical protective clothing, Category III, Type PB [3] 
• EN 14126 (barrier to infective agents) 
• Antistatic treatment (EN 1149-5) - on inside
• Yellow color

• Made from pure high-density polyethylene 
• Lint-free & antistatic 
• Provide excellent abrasion resistance 
• Soft, lightweight and breathable 
• Type 5 & Type 6 Protection 
• 3 – piece hood 
• Elasticated Facial opening, Waist, Cuffs and Ankles 
• Tyvek Zipper 

• Colour: White 
• Material: Microporous Laminate 
• Seam Style: Serged 
• Standards: Type 6 (EN 13034), Type 5 (EN-ISO 13982-1:2004) 
• Closure Type: Two-Way Zipper 

• D.O.S.H Approval No.: JKKP DR 60/99 
• Conforms to Standard: EN149, AS/NZS 1716 
• Color: White 
• Respirator Style: Flat Fold 
• Nose Foam 

• Economical N95 disposable particulate respirator
• Designed to help provide quality, reliable worker respiratory protection for certain non-oil based particles
• 3M proprietary filter media and V-shaped pleats that flex with mouth movement for easier talking and expand for ease of breathing.
• Uniquely designed tabs for respirator positioning on the face
• Flat fold design allows for convenient storage prior to use
• Adjustable nose clip helps provide a custom fit and secure seal
• Spacious inside with comfortable inner layer
• Compatible with a variety of eyewear and hearing protection from 3M 

• Colour: Dark Grey
• ANSI Z87.1-2003 standard 
• Connecion Type: Bayonet 
• Harness Type: 4 point 
• Material: Silicone, Thermoplastic Elastomer (TPE) 

• Colour: Grey 
• Harness Type: 4 point 
• Connection Type: Bayonet 
• Primary Material: Thermoplastic Elastomer (TPE)
• Reusable half facepiece respiratory

• Capacity of Activated Carbon: 100 cc/pc 
• JKKP No.: MR 155/02 
• Colour: Olive 
• Connection Type: Bayonet

• Colour: White 
• JKKP No.: MR 157/03 
• With advanced electrostatically charged microfiber filter media 
• Comfort and versatility 

• Color: White 
• Designed for easier and quickly snap fit
• Washable 
• Very light and only 0.5 ounces per each 
• Made of Polyurethane 

• Capacity of Activated Carbon: 55cc 
• JKKP No.: MR 46/98  
• At least 95 percent filtration efficiency against certain non-oil based particles 
• With Activated Carbon 55cc to help remove Organic Vapour Odour 
• With advanced electrostatically charged microfiber filter media 

• Thermoplastic Elastomers 
• Two customised Asian size face pieces
• Textured face piece to prevent slipping and maintain consistent seal at all times 
• Compact design increase vision and safety 
• Lightweight body and cradle head harness increase comfort 
• Minimal replaceable parts to save space, time and money 
• Snap fit cartridges for easy assembly 
• Drop-down strap for wearer convenience and acceptance 

• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
• Malaysia SIRIM: MS 2323 : 2010
• Malaysia DOSH Approval: JKKP/2021/12-01/06/00033/0001
• Two-strap design with welded dual point attachment helps provide a secure seal
• Sculpted nose panel & cushioning nose foam for comfort and fit well to nose contours and face
• Adjustable nose clip helps provide a custom fit and secure seal
• With 3M’s advanced electret media to block very small particles and improve breathing

• For immediate emergency flushing of eye injuries, provides fast and effective relief.
• Durable and easy to squeeze polyethylene bottle has an eyecup with captive snap on cap.
• The eyecup has perforated plate to break up the stream for a gentle spray to the eye. 
• A capped air vent valve prevents drawback of contaminated fluid back into bottle.
• Used water exits through a drain tube.
• Polyethylene bottle can stores 500ml of water.
• Without chemicals Solution

• This welding had shield fitted with adjustable headgear to fits various head size.
• Provides extra coverage from weld spatter and radiation plus aerodynamically contoured to offer superior welding fume deflection.
• The cover made from Thermoplastic, resistant to heat and weld spatter
• Flip-up front for easy welding inspection
• Easy to use, lightweight, and durable
• Meet ANSI Z87.1 Standard
• Designed specifically for welders comfort, versatility & performance

• Rounded shape side tension knobs that allows flip up visor to be positioned as per user wishes
•  Lightweight and comfortable with height adjustment and ratchet locking system.
• Browguard Visor Holder made of HDPE
• Visor EYE-PG-FC48C-CE made of Polycarbonate
• Tinted Eye-PG-FC48G5-CE visor made of Polycarbonate, for anti-glare, brazing and light cutting operating purposes.
• Meet ANSI Z87.1 & EN166 – B Standard
• Can only be fitted with all Proguard types of clear & tinted visor.

• High-strength thermoplastic crown protector provides impact resistance over a wide range of temperatures.
• Complete headgear and visor unit. Visor (ML200B) mounts quickly to Headgear (ML100R) without tools, snaps or cams.
• Adjustable pin-lock for height adjustment with ratchet locking system.
• Rounded shape side tension knobs that allows flip up visor to be positioned as per user wishes.
• Meets ANSI Z87.1-2003.
• Clear & bullet shape polycarbonate visor provides high impact protection

• Close fit of the tinted goggle frame provides good comfort. 
• Comfortable adjustable headband and improved ventilation system. 
• Dual lift front welding goggle with shade 5 lens. 
• Design of eyeglasses capable. 
• With flip-up mechanism. 
• Fit perfectly over prescription glasses. 
• Comply to ANSI Z87.1 & EN166 

• Polycarbonate lens to protect against impact hazard.
• DuraCoat offers anti-scratch & UV protection.
• Polyimide (Nylon) material provide high temperature & electrical resistances.
• Adjustable temples for perfect fit & comfort.   
• Uninterrupted lateral vision in a single wide panorama lens.
• Lightweight for comfort, only 30g.
• Meets ANSI Z87.1 & EN166.

• With vent enhance air circulation and anti-fog coating to minimize fogging.
• The polycarbonate lenses, high impact strength, longer service life, 99% UV protection.
• The pliable vinyl frame and adjustable strap provide a comfortable fit. 
• Protect against chemicals or pesticides splash.
• Meets ANSI Z87.1-2010 & DOSH approval (JKKP No. EW 03/01)

• Shell is made of tough Acrylonitrile Butadiene Styrene (ABS) material
• Comfortable and 6-point suspension with height adjustment
• Easier slide-lock suspension
• Embedded with adjustable ventilation valves
• Short brim for better visibility
• Sweatband can be remove for cleaning
• Meets SIRIM (MS 183:2001) & DOSH Approved (JKKP No.: SH 08/18)
• Adjustable Chin Strap included

• Length: 210 cm 
• Diameter: 1.37 cm 
• Width: 35 cm 
• Polyolefin resin-coated steel pipe 
• Color: Green 
• Easy to clean
• Prevent diseases spread
• Chemical resistant
• Suitable for nursery
• Smooth surface minimizes plant damage

• Length: 300 cm 
• Diameter: 3.18 cm 
• Rigid vinyl chloride resin coated steel pipe 
• Colour: White
• Heavy duty
• Easy to clean
• Prevent diseases spread
• Chemical resistant
• Suitable for outdoor branch supporting

• Length: 240 cm 
• Diameter: 2 cm 
• Polyolefin Resin-Coated Steel 
• Colour: Green
• Light
• Easy to use and clean
• Prevent diseases spread 
• Chemical resistant
• Suitable for nursery
• Smooth surface minimizes plant damage

• Polyolefin resin-coated steel pipe 
• Colour: Brown 
• Heavy duty, light, easy to clean 
• Prevent diseases spread, chemical resistant, suitable for indoor and outdoor plants 
• One end with stainless steel cover to prevent damage of stakes during stake 
• Smooth surface minimizes plant damage, optimum growth and reduced scar 
• Heat sealed caps installed at both ends keep out moisture and eliminate any rust 

• Ideal for Grass cutting and lawn trimming
• The blade edge use as S45C treated with heat to provide excellent wear resistance and long-lasting cutting
• A curved blade finish that is easy to cut grass
• The handle used natural wood and lightweight

• Scissors for cutting twigs, trimming hedges
• Can using as pruning scissors, removing buds of pine & other bushy areas.
• Cutting Ability up to 10 mm
• Steel Blade edge (Yasuki Steel + Mild steel)
• The blade can be sharpened 
• Body joint screw fixing type
• Handle with safety lock

• Putting soil in and out from flower beds, planters and for fertilizing
• Stainless Steel Head hard to rust
• With a scale (Up to 10 cm) that can measure the planting depth of the bulb

• Five-claw type rake
• Apply in clearing, soil preparation after cultivation of flower bed, the vegetable garden, flatten soil and trash collection
• The head is made of steel, which is convenient for working in narrow space
• It can be used on both the tip claw side and back plate side
• The round handle shape that fits perfectly in the hand

• Head is excellent in weather resistance
• Through heat-treated to (stainless steel cutlery) with high strength stainless steel rust, excellent abrasion resistance, low adhesion of the soil, it is easy to clean.
• Adopted as the aperture shape fit comfortably in one’s hand

• Is three-claw type one-handed hoe
• Ideal used for cultivation of flower beds, vegetable gardens and digging work
• The handle adopts an extruded shape suitable for hand
• The head is made of stainless steel which has excellent weather resistance and high rust resistance, and has been heat treated to make it have excellent wear resistance, less soil adhesion and easy maintenance

• Ideal for cultivation work such as flower beds, vegetable gardens, and for home garden
• The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well in your hand, and is an one-hand three claws ploughing hoe
• The head is heat-treated and forged in one-piece (non-welding & integrated process) for durability and stronger against abrasion

• Ideal used to loosen soil clumps of flower beds, vegetable gardens, and to mix soil and fertilizers
• The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well in your hand, and is an one-handed three claws hoe
• The head is heat-treated and forged in one-piece (non-welding & integrated process) for durability and stronger against abrasion

• Capacity: 25 kg 
• Minimum Division: 5 g 
• Working Temperature: 0°C~40°C 
• Relative Humidity: ≤85%Rh 
• 4 Different Unit Price Memories 

• Special designed use for measure pressure of spraying equipment.
• Easily get the pressure reading from this instrument for Nozzles, Sprayer and others Equipment calibration use.
• Simple to install.
• Light weight, durable and lasting.
• Ideal for Farmers, Educational Institutions, Horticulturists, Agriculture Plantation, Nozzles Manufacturers, Agrochemical Manufacturers & etc.

• Convex degree
• 2ml per reading
• Transparency
• Indissolubility
• High chemical resistant
• Made of polypropylene
• Size: Ø: 4.3cm x h: 31.5cm

• Brass Material
• 18G or 19G
• 3 size for each type
• Made by Syarikat Jun Chong Sdn Bhd
• Length 7.2cm

• Used to connect watering hose after cut to prevent leaking 
• To extension watering hose for watering purposes and etc 
• Brass Material
• Made by Syarikat Jun Chong Sdn Bhd

• Connect 3 watering hose for watering purposes 
• Brass material
• Made by Syarikat Jun Chong
• 3 sizes available

• Connect Watering Hose After Cut to Prevent Leaking 
• Extension Watering Hose for Watering Purposes 
• Brass material
• Made by Syarikat Jun Chong Sdn Bhd

• Transparent body provide visible spraying condition
• Rectangular window enable adjustment of nozzle visibly
• Ventilation holes provide better spraying quality
• Gross Weight 140gm only
• Durable & easy to move around
• For cone nozzle only

• Filter dirt / sediment 
• Prevent clogging of hose for farming / planting 
• 50 Mesh 
• Thread: M25 x 1.25 
• Plastic, brass, stainless steel 

• Filter dirt / sediment 
• Prevent clogging at the nozzle 
• Stainless Steel Mesh + Plastic material
• 30 Mesh

• Filter dirt / sediment 
• Prevent clogging at the nozzle 
• Stainless Steel Mesh + Plastic 
• 100 Mesh 

• Filter dirt / sediment 
• Prevent clogging at the nozzle 
• Stainless Steel Mesh + Plastic
• 2 types available (different mesh)

• Efficacy, Workers Safety & Environmental Protection 
• Over 24% saving of spray solution 
• Consistent flow rate ±1.5% accuracy 
• Instant on/off – No dripping 
• Constant Flow Rate & Pressure Regulation 
• Consistent Swath and Droplets Size 
• High grade Delrin® with throttle pins and springs made of stainless steel and a VITON® rubber diaphragm 
• Maximum pressure 7 Bar

• Made of material POM
• Droplets size < 119µm >  216µm
• Hollow Cone Nozzle
• 9 Sizes Available
• Suitable for Knapsack Sprayer
• Made in Italy