Search result
Sort by
Show result
  • Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
  • Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
  • Versatile protection against many oil and non-oil based particulate contaminants
  • Bayonet compatibility allows use with many 3M™ half and full facepiece designs

Do Not Use For:

Gases and vapors, including those present in paint spray operations, unless combined with approved chemical cartridges.

  • Sandblasting.
  • Oxygen deficient atmospheres.
  • Aerosol concentrations that exceed:
    • 10 times the permissible exposure limit (PEL) with half facepiece, or
    • 10 times the PEL with full facepiece qualitatively fit tested, or
    • 50 times the PEL with full facepiece quantitatively fit tested, or
    • applicable government regulations, whichever is lower.
RM 54.40
  • 1.4 Litres 
  • Plunger Pump 
  • Maximum Operating Pressure: 2 Bar 
  • Product Origin: Italy 
RM 54.50
  • Efficacy, Workers Safety & Environmental Protection
  • Over 24% saving of spray solution
  • Consistent flow rate ±1.5% accuracy
  • Instant on/off – No dripping
  • Constant Flow Rate & Pressure Regulation
  • Consistent Swath and Droplets Size
  • High grade Delrin® with throttle pins and springs made of stainless steel and a VITON® rubber diaphragm
  • Maximum pressure 7 Bar
RM 55.90
  • Short, compact design made from hard-wearing plastic POM.
  • Slimmer than other comparable double flat fan nozzles.
  • Separates slides for each nozzle allows individual exchange of each nozzle tip, easy to clean.
  • Nozzles are placed in a 100 / 500 Orientation, this combination of spray patterns has been successfully proven by the TurboDrop HiSpeed nozzles.
  • Good drift control an excellent coverage of vertical and angular targets.
  • Optimum pressure: 2-4 bar
  • Application speeds from 6 - 15 km/h or more.
  • Fits on all nozzle holders with standard bayonet system.
RM 57.20
  • Three types available
  • Long durablility
  • Easy to fix
  • Good quality
RM 51.80
  • Convex degree
  • 2ml per reading
  • Transparency
  • Indissolubility
  • High chemical resistant
  • Made of polypropylene
  • Size: Ø: 4.3cm x h: 31.5cm
RM 63.80
  • Length: 210 cm 
  • Diameter: 1.37 cm 
  • Width: 35 cm 
  • Polyolefin resin-coated steel pipe 
  • Color: Green 
  • Easy to clean
  • Prevent diseases spread
  • Chemical resistant
  • Suitable for nursery
  • Smooth surface minimizes plant damage
RM 52.30
  • Length: 300 cm 
  • Diameter: 3.18 cm 
  • Rigid vinyl chloride resin coated steel pipe 
  • Colour: White
  • Heavy duty
  • Easy to clean
  • Prevent diseases spread
  • Chemical resistant
  • Suitable for outdoor branch supporting
RM 91.50
  • High-strength thermoplastic crown protector provides impact resistance over a wide range of temperatures.
  • Complete headgear and visor unit. Visor (ML200B) mounts quickly to Headgear (ML100R) without tools, snaps or cams.
  • Adjustable pin-lock for height adjustment with ratchet locking system.
  • Rounded shape side tension knobs that allows flip up visor to be positioned as per user wishes.
  • Meets ANSI Z87.1-2003.
  • Clear & bullet shape polycarbonate visor provides high impact protection
RM 57.40
  • Capacity of Activated Carbon: 100 cc/pc 
  • JKKP No.: MR 152/02 
  • Colour: Yellow 
  • Connection Type: Bayonet 
RM 51.80
  • Capacity of Activated Carbon: 100 cc/pc 
  • JKKP No.: MR 155/02 
  • Colour: Olive 
  • Connection Type: Bayonet
RM 71.40
  • Colour: Grey 
  • Harness Type: 4 point 
  • Connection Type: Bayonet 
  • Primary Material: Thermoplastic Elastomer (TPE)
  • Reusable half facepiece respiratory
RM 58.30
  • Made from soft, resilient silicone and heat-resistant plastics.
  • Cool, dry comfort with the 3M cool flow valve and valve cover design to direct exhaled breath downward.
  • Softer feel on the face provided by a soft seal design and advanced silicone material.
  • Slim, flexbile head hardness.
  • Enhanced compatibility and comfort with light and compact design.
  • Reduced tension and pressure points on the face with unique face seal design.
  • Compatible with 3M snap-fit style cartridge and filters.
RM 51.40
  • Cowhide split leather
  • Sew on adjustable neck loop & waist ties
  • Superior protection
  • Heavy duty stitching
  • Reinforced snaps
  • Yellow & white color
RM 59.70
  • Soft Urethane PVC Safety Boot
  • Soft and synthetic inner lining
  • Anti-slip sole and anti-static properties
  • Oil resistance sole and waterproof
  • Chemical resistant sole
  • Manufactured under stringent quality control
  • Steel Toe Cap & Steel Mid Sole
  • Yellow color
RM 69.20
  • Excellent heat, spark & harmful welding rays protection
  • Made of quality split leather
  • With leather straps and buckles
  • Free size
RM 54.20
  • Ideal for flower beds, vegetable farm, home garden cultivation work, removing of root and other tillage
  • The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well in your hand, and is an one-handed digging hoe
  • The head is heat-treated and forged in one-piece (non-welding & integrated process) for durability and stronger against abrasion
RM 53.00
  • Ideal for grass shaving work, digging, planting bulbs and seedlings.
  • Stainless Steel blade is heat treated, it has excellent abrasion resistance and sharpness, hard to rust and easy to maintain
  • Both sides with blade make it easy to use and convenient for slopes shaving works
RM 67.00
  • Ideal used to loosen soil clumps of flower beds, vegetable gardens, and to mix soil and fertilizers
  • The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well in your hand, and is an one-handed three claws hoe
  • The head is heat-treated and forged in one-piece (non-welding & integrated process) for durability and stronger against abrasion
RM 54.00
  • Ideal for cultivation work such as flower beds, vegetable gardens, and for home garden
  • The handle adopted Oak, the more you use, the more it fits in your hand, lightweight, fits well in your hand, and is an one-hand three claws ploughing hoe
  • The head is heat-treated and forged in one-piece (non-welding & integrated process) for durability and stronger against abrasion
RM 51.00
  • Folding Hacksaw for sawing logs
  • Regular Tooth
  • Ideal for trimming and raw tree pruning work
  • The saw blade uses a hardened steel strip, and impact hardening is applied to the cutting edge to improve hardness, sharpness and durability
  • The grip part is made of cherry wood and with varnish coating
  • Lightweight (only 120 g)
RM 54.50
  • Folding Hacksaw for sawing logs
  • The sharpen with fine tooth
  • Ideal for trimming and processing logs
  • Suitable for bamboo pulling and plywood cutting
  • The saw blade uses a hardened steel strip, and impact hardening is applied to the cutting edge to improve hardness, sharpness and durability
  • The grip part is made of cherry wood and with varnish coating
  • Lightweight (only 120 g)
RM 54.50
  • Ideal for raw tree pruning, crafts and forest work
  • The blade has been fully hardened and impact hardened to improve hardness, sharpness and durability
  • The handle and sheath are made of beech wood and have a varnish
  • The sharpening is ordinary tooth of Edo tooth
RM 91.00
  • Ideal for high branch pruning and cutting
  • Versatile blade can be pruned smoothly
  • Tip of the blade is key-shaped and the saw blade does not come off easily
  • Ultra-lightweight (only 150 g) and easy to use
  • Aluminum handle lance
  • Saw blade is made from SK-5 steel 
RM 72.00
  • Ideal for Pruning and Trimming of garden trees and fruit trees
  • Cutting ability up to 15 mm
  • SK-5 Blade (Hard chrome plating)
  • Lightweight Aluminum + TPR Handle
  • New design (Higher fit & less cutting power loss) for realizing light cutting force
  • UD (Universal Design) that can be used by men & women
  • With Wire cut
  • Convenient hand-lock type
  • Smooth insect spring type
RM 51.50
  • Ideal for Pruning of flowers and twigs, bunch cutting of cut flowers, harvesting of fruit trees and vegetables, trim flowers bud and fruit trees bud
  • Cutting ability up to 9 mm
  • SK-5 Blade (Hard chrome plating)
  • Lightweight Aluminum + TPR Handle
  • New design (Higher fit & less cutting power loss) for realizing light cutting force
  • UD (Universal Design) that can be used by men & women
  • With Wire cut
  • Convenient hand-lock type
  • Smooth insect spring type
RM 53.00
  • Ideal for harvesting fruits & vegetables, bud trimming of flower & fruit trees
  • Cutting ability up to 6 mm
  • SK-5 Blade (Hard chrome plating)
  • Lightweight Aluminum + TPR Handle
  • New design (Higher fit & less cutting power loss) for realizing light cutting force
  • UD (Universal Design) that can be used by men & women
  • With Wire cut
  • Convenient hand-lock type
  • Smooth insect spring type
RM 53.00
  • Widely used for pruning, bonsai care, harvesting and from gardening work to agricultural work
  • Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
  • The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
  • Finish back cutter gap removes resin and dirt
  • Caulking method for body joint
  • Cutting ability up to 8 mm
RM 67.00
  • Long blade edge 70 mm
  • Widely used for pruning, bonsai care, harvesting and from gardening work to agricultural work
  • Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
  • The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
  • Finish back cutter gap removes resin and dirt
  • Caulking method for body joint
  • Cutting ability up to 8 mm
RM 67.00
  • Ideal used in fresh flower and flower arrangement
  • Blade is using Yasuki steel and through heat-treatment, so it has excellent abrasion resistance
  • The steel core has firm hardness, the sharpness of blade is good and long-lasting cutting
  • Caulking method for body joint
  • Cutting ability up to 8 mm
RM 67.00